Inflatable Hangar and Inflatable Membrane Structure

Home>Products>By Series>Inflatable Product>Inflatable Hangar and Inflatable Membrane Structure

Professional Product Detail

Multi-Sport Community Air Dome | Engineered Air Dome | BTCOOPS

Name: Multi-Sport Community Air Dome | Engineered Air Dome | BTCOOPS
Brand: BTCOOPS

Explore custom multi-sport community air dome engineered for weather-dependent community sports scheduling. Design-led specification, accessories and global project inquiry by BTCOOPS.

Category: Inflatable Hangar and Inflatable Membrane Structure

M0402-ASD-01 | A / AIR-SUPPORTED MEMBRANE

Multi-Sport Community Air Dome

Professional project-specific product concept

1. Product Overview & Market Need

The Multi-Sport Community Air Dome is proposed by BTCOOPS / Wuxi Fenigal for weather-dependent community sports scheduling. It is targeted at municipal recreation operators and campus facility managers. Rather than presenting a fixed off-the-shelf building, this page defines a product configuration and performance brief for an engineered, quotation-ready project.

This facility is an engineered air-supported structure: perimeter-anchored architectural membranes are stabilized by controlled internal overpressure. Its pressure plant, doors, controls and standby power form part of the structural solution.

2. Benefits & Distinctive Positioning

· Mission-specific advantage: interchangeable court layouts and divisible zones.

· A clear-span layout can be optimized for usable circulation and equipment envelopes rather than solely for the exterior footprint.

· Factory-prefabricated flexible components support phased site mobilization and a predictable installation plan; actual schedule is project-dependent.

· BTCOOPS may coordinate membrane components, auxiliaries, integration documentation and export logistics, with local engineering/installation obligations expressly defined in the contract.

3. Applications & Typical Buyers

Primary operating scenario: weather-dependent community sports scheduling. Prospective buyers include municipal recreation operators and campus facility managers. Common procurement routes include direct facility owners, EPC contractors, specialist installers and local project distributors.

· Core application: multi-sport community air dome for the stated site and operational task.

· Adjacent deployments: temporary capacity expansion, phased facility rehabilitation or relocatable site operations where permissible.

· Procurement drivers: weather protection, functional clearance, predictable system interfaces, maintenance access and lifecycle cost.

4. Preliminary Configuration & Specification Brief

Model / Product code	M0402-ASD-01
Structure type	Air-Supported Membrane
Configuration envelope	multiple courts or flexible courts under a single envelope — project planning request, not an advertised certified dimension
Structural sizing	Custom width, length, height and clear opening from project layout, geotechnical and local code inputs
Operating pressure	Building-wide controlled differential pressure; setpoint and control envelope to be established by stamped structural/mechanical design.
Design load basis	Project wind, snow, seismic (if applicable), accidental loads and anchoring uplift assessed for actual address
Service conditions	Outdoor climate, design temperatures, humidity, corrosion, UV and exposure to chemicals set during RFQ
Status	CONCEPT CONFIGURATION. No fixed wind/snow rating, clearance, warranty or certification claimed.

5. Architecture, Materials & Structural Assembly

· Envelope: reinforced polyester architectural fabric with PVC coating and optional PVDF finish; other specified membrane materials only after compatibility testing.

· Structural system: membrane panels, high-frequency/thermal welded joints, perimeter clamping and cable restraint where required by structural analysis.

· Ground works: engineered perimeter foundation and uplift-resisting anchors; steel/composite fixings evaluated for environment and corrosion class.

· Environmental layers: optional insulated double-skin or air-cushion package, daylight strip and internal acoustic/condensation measures.

· Entrances: staff vestibules, controlled doors, emergency exits and vehicle airlocks; leakage budget is integral to pressure-plant sizing.

6. Mechanical, Electrical, Control & Safety

· Primary pressure fan/air-handling plant, pressure sensors, control PLC and alarm/telemetry module.

· Independent standby blower and appropriate emergency power approach; transfer logic and failure-time strategy to be engineered.

· Climate and air-quality plant: filtration, ventilation, heating/cooling/dehumidification as the actual process requires.

· Pressure-compatible access doors, life-safety exits, emergency lighting and code-compliant fire-protection integration.

Critical risk and compliance focus: egress capacity, glare, air exchange and crowd circulation. These aspects require an approved design package; the example configuration does not itself establish regulatory compliance.

7. Project Sizing & Engineering Selection

· Provide the actual site location, cadastral footprint, use period, desired layout and a scaled drawing for multiple courts or flexible courts under a single envelope.

· Confirm minimum unobstructed width/height, traffic movement, openings, personnel occupancy and adjacent equipment.

· Supply jurisdiction-specific wind and snow design criteria, geotechnical report, fire and building/temporary works requirements.

· Define the operating duty cycle and facilities: permanent, seasonal, mobile, standby power, HVAC loads and maintainability.

· Engineering review must specifically address egress capacity, glare, air exchange and crowd circulation.

8. Customization & Scope Options

· Custom length, clear span, membrane color, insulation, entrance orientation and roof profile subject to approval.

· Custom vehicle or people access, lighting layout, viewing/translucent strips and site signage.

· BMS/PLC supervisory monitoring, temperature/humidity sensors and fault-alarm handoff to the customer's systems.

· Branding and multi-language operations documentation; region-specific equipment selection after compatibility review.

9. Accessories & Supporting Packages

· Membrane repair kit, spare coated fabric, patches, specified welding/repair instructions

· Packing, erection and lifting aids, tensioning fittings, approved anchors and on-site consumables

· Electrical controls, protective devices, emergency lighting, optional generator interface

· Door/vehicle airlock, protected blower enclosure, backup pressure-control components

10. Packaging, Export, Installation & Logistics

Delivery may be scoped as membrane package only, component set with ancillary equipment, or engineered supply plus approved installation assistance. Crating, bundle weights, container plan and import classifications must be finalized only after drawings and bill of materials are approved.

Indicative workflow: site survey / RFQ → concept layout → structural and mechanical calculations → commercial scope and incoterms → approved manufacturing drawings → pre-shipment inspection → sea/land/air transport planning → site foundation and erection → functional commissioning and training.

· Transport mode: containerized sea freight is generally preferred for bulk assemblies; use truck or air freight only after packed volume/weight confirmation.

· Installation: define local civil works, crane/manpower, permit responsibilities, testing supervision and commissioning deliverables in the purchase contract.

11. Quality, Acceptance, Warranty & Commercial Conditions

· Supplier quality dossier requested: material batch certificates, coated-fabric test reports, weld/seam quality records and approved inspection checklist.

· Factory acceptance: dimensional inspection, seam/inflation leakage assessment as relevant, electrical FAT and labeled spare inventory.

· Site acceptance: documented anchoring inspection, pressure/control functional tests, emergency scenario checks and local authority acceptance where required.

· Warranty duration, exclusions, spare quantities, production lead time and claimed certifications are NOT assigned in this draft; record actual supplier contract and third-party evidence before publication.

· Typical quotation inputs: named Incoterm (EXW/FOB/CIF etc.), project boundaries, civil works exclusion, taxes, onsite service, loading, insurance and after-sales parts support.

12. Frequently Asked Questions

Q. Is this a standardized building size?
A. No. The reference design is defined by multiple courts or flexible courts under a single envelope; dimensional performance becomes firm only after an approved drawing and site-specific calculation.

Q. What keeps the structure stable?
A. A controlled internal pressure system paired with engineered anchors, envelope and standby equipment.

Q. Can this structure operate in strong winds or snow?
A. It can be designed for a stated climate subject to analysis. No generic wind or snow guarantee is made; special review is required for egress capacity, glare, air exchange and crowd circulation.

Q. What information is needed for a realistic quotation?
A. Site, plan, span/height, opening details, expected operating period, environmental loads, required systems, installation scope, destination and acceptance standard.

13. Request for Quotation / CTA

Ask BTCOOPS / Wuxi Fenigal for an engineered concept proposal for Multi-Sport Community Air Dome. Include site country/city, annotated general layout, application duty, egress capacity, glare, air exchange and crowd circulation, wind/snow basis, delivery destination, requested scope of installation, commissioning and project timeline.

14. Related Models

· M0402-ASD-02 — Full-Size Football Training Air Dome

· M0402-ASD-03 — Multi-Court Tennis Air Dome

· M0402-ASD-04 — Basketball & Volleyball Arena Air Dome

· M0402-ASD-05 — Indoor Swimming Pool Air Dome

Project Inquiry · Technical & Commercial

Send Your Custom Product Requirement

Tell us the product family, intended application, size, quantity, operating conditions and delivery target. Your inquiry email will automatically include the page you are viewing so our team can understand the exact product, technology or reference that led to your request.

Product family or model of interest
Required size, quantity and customization
Application, installation and operating environment
Project country, operating conditions and delivery target

Inquiry context Current page details will be attached automatically.