Pearl
Pearl-LED200DSE Balloon Light for Events | BTCOOPS
Explore Pearl-LED1200SE Pearl SE balloon light for events, rental and branding, with configurable envelope, stand, cable, plug and control options
Pearl-LED200DSE Balloon Light
One-sentence positioning |
Product Introduction
Pearl-LED200DSE is a standard-value professional DC-powered Pearl balloon light designed for portable event, branding and temporary illumination where fixed AC cabling is inconvenient. It combines the Pearl spherical diffuser with a dedicated DC electrical architecture matched to the approved battery, vehicle or mobile-power system.
What Defines This Model
· SE platform: Standard / Economical Professional Grade.
· Output reference: Approx. 20,000 lm; Approx. 8.2m lighting radius and 209m² area at the 10 lux edge reference level.
· Envelope and branding: Standard waterproof nylon; glossy-finish nylon optional for smoother branding surfaces and vinyl graphics.
· Power and control: Dedicated DC input matched to the approved battery pack, portable power station or vehicle-supported arrangement. Basic on/off standard; selected dimming, remote or project-level controls optional.
· Deployment: TP550, TP420, TP300 and TPC280 available. TPC280 / TP300 / TP420 depending on diameter and installation. Standard 7m head cable; optional hard transport case.
Technical and Performance Data
Parameter | Specification |
Model | Pearl-LED200DSE |
Series | Pearl SE |
Light source | DC COB |
Rated power | 200W |
Reference luminous efficacy | Approx. 100 lm/W |
Calculated luminous flux | Approx. 20,000 lm |
Reference lighting coverage | Approx. 8.2m lighting radius and 209m² area at the 10 lux edge reference level. |
Light character / CCT | Warm white / neutral white / daylight white on request. |
Input voltage | Dedicated DC input matched to the approved battery pack, portable power station or vehicle-supported arrangement. |
Power architecture | Integrated practical electrical layout; normally no external PSU. Dedicated DC model matched to an approved battery/mobile-power solution. |
Control options | Basic on/off standard; selected dimming, remote or project-level controls optional. |
Envelope material | Standard waterproof nylon; glossy-finish nylon optional for smoother branding surfaces and vinyl graphics. |
Balloon diameter | 90 / 130 / 160cm spherical envelope options. |
Stand / tripod | TP550, TP420, TP300 and TPC280 available. TPC280 / TP300 / TP420 depending on diameter and installation. |
Head cable | Standard 7m; longer/custom lengths available. |
Plug options | US, EU and industrial waterproof plugs. |
Transport case | Optional waterproof engineering-plastic storage and transport case. |
Typical Applications
· Pop-up brand activations and mobile event lighting where fixed mains power is inconvenient.
· Temporary hospitality, reception or booth lighting supported by batteries, portable power stations or vehicle power.
· Rental and dealer packages requiring fast relocation and simplified electrical deployment.
· Emergency or short-term event support where cable routing needs to be minimized.
Representative Application Cases
The following are illustrative project scenarios for website communication and selection guidance; they are not presented as named customer reference projects.
Scenario | Suggested arrangement | Why this model fits |
Mobile brand activation | Use one or more units from battery/portable power, with tripod selection matched to balloon size. | Avoids long mains-cable runs while keeping a clean luminous brand object. |
Pop-up hospitality zone | Deploy around temporary reception, check-in or catering areas. | Soft light and rapid relocation suit changing event layouts. |
Rental fleet package | Pair the light with labelled cables, tripod and optional hard transport case. | Improves repeat setup and protects equipment between events. |
Customization Options
· Envelope diameter within the normal range, with 220-250cm reviewed as a special engineered option.
· White, colored or branded envelope; logo, print or vinyl-graphic treatment matched to material and reuse needs.
· Tripod, suspension or project-specific support using TP550 / TP420 / TP300 / TPC280 as the standard stand family.
· Standard 7m head cable; extended cable lengths and US / EU / industrial waterproof plugs on request.
· Optional waterproof engineering-plastic storage and transport case.
· CCT, control and electrical configuration subject to model and project scope.
· Battery pack / portable power station / vehicle-power interface matched to approved DC architecture; battery system is project-specific.
Installation and Large-Envelope Boundary
Normal Pearl envelope sizes are selected according to rated power. Custom 220-250cm spherical envelopes require a defined application, installation height, environment and support plan. At least TP550 or an industrial hand-winch lifting stand is required. For larger diameters, the Arcti architectural balloon-light family is the more appropriate reference platform.
Send Your Custom Product Requirement
Tell us the product family, intended application, size, quantity, operating conditions and delivery target. Your inquiry email will automatically include the page you are viewing so our team can understand the exact product, technology or reference that led to your request.
- Product family or model of interest
- Required size, quantity and customization
- Application, installation and operating environment
- Project country, operating conditions and delivery target