Pearl
Pearl-BULB-E40EN Balloon Light for Events | BTCOOPS
Explore Pearl-BULB-E40EN Pearl EN balloon light for events, rental and branding, with configurable envelope, stand, cable, plug and control options.
Pearl-BULB-E40EN Balloon Light
One-sentence positioning |
Product Introduction
Pearl-BULB-E40EN is an entry-level Pearl lamp-holder balloon light built around a E40 format. It gives dealers and budget-sensitive buyers a simple platform that can use compatible locally available lamps while retaining the visual and branding advantages of a soft luminous balloon.
What Defines This Model
· EN platform: Entry / Economical Grade.
· Output reference: Depends on installed bulb quantity and wattage. With LED bulbs at about 100 lm/W, every 300W total bulb power gives about 30,000 lm.; Reference rule: about 30,000 lm corresponds to about a 10m lighting radius at the 10 lux edge level.
· Envelope and branding: Ordinary nylon, Oxford fabric or PVC, selected according to application and target cost.
· Power and control: 120V or 230V AC selectable, 50/60Hz. High-power versions are normally AC-only. Basic on/off; dimming depends on the installed lamps and matched control equipment.
· Deployment: TP550, TP420, TP300 and TPC280 available. TPC280 / TP300 / TP420 depending on diameter and installation. Standard 7m head cable; optional hard transport case.
Technical and Performance Data
Parameter | Specification |
Model | Pearl-BULB-E40EN |
Series | Pearl EN |
Light source | E40 lamp-holder / LED bulb solution |
Rated power | Configurable according to installed bulbs |
Reference luminous efficacy | Approx. 100 lm/W |
Calculated luminous flux | Depends on installed bulb quantity and wattage. With LED bulbs at about 100 lm/W, every 300W total bulb power gives about 30,000 lm. |
Reference lighting coverage | Reference rule: about 30,000 lm corresponds to about a 10m lighting radius at the 10 lux edge level. |
Light character / CCT | Depends on installed lamp; LED bulbs can be selected by required CCT. |
Input voltage | 120V or 230V AC selectable, 50/60Hz. High-power versions are normally AC-only. |
Power architecture | Simplified integrated electrical layout; normally no external PSU. AC lamp-holder structure matched to installed lamps. |
Control options | Basic on/off; dimming depends on the installed lamps and matched control equipment. |
Envelope material | Ordinary nylon, Oxford fabric or PVC, selected according to application and target cost. |
Balloon diameter | 90 / 130 / 160cm common starting sizes; final diameter matched to lamp quantity, heat load and application. |
Stand / tripod | TP550, TP420, TP300 and TPC280 available. TPC280 / TP300 / TP420 depending on diameter and installation. |
Head cable | Standard 7m; longer/custom lengths available. |
Plug options | US, EU and industrial waterproof plugs. |
Transport case | Optional waterproof engineering-plastic storage and transport case. |
Typical Applications
· Budget-sensitive promotions and dealer starter stock.
· Small and medium event decoration using locally replaceable lamps.
· Branding installations where simple maintenance and familiar lamp formats are priorities.
· Temporary retail, booth and hospitality displays with flexible lamp selection.
Representative Application Cases
The following are illustrative project scenarios for website communication and selection guidance; they are not presented as named customer reference projects.
Scenario | Suggested arrangement | Why this model fits |
Dealer starter package | Configure with locally available compatible LED bulbs and practical tripod. | Reduces replacement-lamp dependency and entry investment. |
Retail / promotional booth | Use branded envelope with simple on/off operation. | Combines basic illumination and a visible advertising surface. |
Community / hospitality event | Match bulb quantity and CCT to local needs. | Simple lamp-holder architecture is easy to understand and service. |
Customization Options
· Envelope diameter within the normal range, with 220-250cm reviewed as a special engineered option.
· White, colored or branded envelope; logo, print or vinyl-graphic treatment matched to material and reuse needs.
· Tripod, suspension or project-specific support using TP550 / TP420 / TP300 / TPC280 as the standard stand family.
· Standard 7m head cable; extended cable lengths and US / EU / industrial waterproof plugs on request.
· Optional waterproof engineering-plastic storage and transport case.
· CCT, control and electrical configuration subject to model and project scope.
Installation and Large-Envelope Boundary
Normal Pearl envelope sizes are selected according to rated power. Custom 220-250cm spherical envelopes require a defined application, installation height, environment and support plan. At least TP550 or an industrial hand-winch lifting stand is required. For larger diameters, the Arcti architectural balloon-light family is the more appropriate reference platform.
Packaging Options
Topic | Details |
Standard packing concept | Light head/electrical assembly protected separately; envelope packed clean and dry; head cable and accessories labelled; tripod packed separately when ordered. |
Optional hard case | Waterproof engineering-plastic storage and transport case for rental fleets, dealer stock and repeated project logistics. |
Packing data | Final carton/crate size, net weight and gross weight are confirmed after the exact envelope, stand, PSU/ballast, plug and case configuration is approved. |
Documentation | Packing list, model label and basic operating information can be prepared; compliance documents are supplied only where the approved product/configuration supports them. |
Transport Options
Method | Best use |
Courier / express air | Suitable for samples, spare parts and urgent small quantities where package size permits. |
Air freight | Suitable for urgent project shipments; oversized tripods, hard cases and batteries require route-specific review. |
Sea freight | Preferred for multiple units, large stands, cases and regular commercial shipments where transit time allows. |
Road / rail | Can be evaluated by destination and route availability. Final packing method follows carrier and handling requirements. |
Warranty and Production Cycle
Commercial item | Recommended website wording |
Warranty | Recommended website default: 12 months from shipment against manufacturing defects under normal use, subject to the final quotation / sales contract. Soft-goods wear, printing abrasion, accidental or wind/rigging damage, unauthorized modification and consumables are excluded unless otherwise agreed. |
Indicative production lead time | Approx. 10-15 working days for normal quantities. Count starts after deposit / order activation, final technical confirmation and artwork approval where applicable. |
Custom-project allowance | Special graphics, PTFE material, non-standard control, 220-250cm envelope, special support, battery engineering or unusual documentation may extend lead time. |
Final commercial basis | Final warranty, lead time, packing, price and Incoterm are governed by the approved quotation / sales contract. |
Frequently Asked Questions
What balloon sizes are available? 90 / 130 / 160cm common starting sizes; final diameter matched to lamp quantity, heat load and application. Custom 220-250cm sizes require application review, at least TP550 or an industrial hand-winch lifting stand. Larger diameters should move to the Arcti architectural balloon-light platform.
Can logos or graphics be added? Yes. Printing, color treatment and vinyl-graphic approaches are reviewed against envelope material, viewing distance, expected reuse and cleaning requirements.
Can the cable, plug or control be customized? Yes. The standard head cable is 7m; longer cable, destination-market plugs and model-appropriate control options can be configured.
Which tripod should be selected? TP550, TP420, TP300 and TPC280 available. TPC280 / TP300 / TP420 depending on diameter and installation. Final selection must consider wind condition, installation height and public-safety requirements.
Is this suitable for rental fleets? Yes. Rental packages should prioritize labelled cables/accessories, replaceable soft goods, standardized stand selection and an optional hard transport case.
Request a Project-Matched Configuration
For quotation, share the event/application, quantity, operating hours, installation height, balloon diameter, voltage or DC requirement, control preference, logo/artwork, stand method, plug type and destination.
Send Your Custom Product Requirement
Tell us the product family, intended application, size, quantity, operating conditions and delivery target. Your inquiry email will automatically include the page you are viewing so our team can understand the exact product, technology or reference that led to your request.
- Product family or model of interest
- Required size, quantity and customization
- Application, installation and operating environment
- Project country, operating conditions and delivery target