Pearl
Pearl-LED600DEN Balloon Light for Events | BTCOOPS
Explore Pearl-LED600DEN Pearl EN balloon light for events, rental and branding, with configurable envelope, stand, cable, plug and control options.
Pearl-LED600DEN Balloon Light
One-sentence positioning |
Product Introduction
Pearl-LED600DEN is a entry-value DC-powered Pearl balloon light designed for portable event, branding and temporary illumination where fixed AC cabling is inconvenient. It combines the Pearl spherical diffuser with a dedicated DC electrical architecture matched to the approved battery, vehicle or mobile-power system.
What Defines This Model
· EN platform: Entry / Economical Grade.
· Output reference: Approx. 60,000 lm; Approx. 14.1m lighting radius and 628m² area at the 10 lux edge reference level.
· Envelope and branding: Ordinary nylon, Oxford fabric or PVC, selected according to application and target cost.
· Power and control: Dedicated DC input matched to the approved battery pack, portable power station or vehicle-supported arrangement. Basic on/off standard on most LED versions.
· Deployment: TP550, TP420, TP300 and TPC280 available. TP300 / TP420 / TP550 depending on diameter, height and wind condition. Standard 7m head cable; optional hard transport case.
Technical and Performance Data
Parameter | Specification |
Model | Pearl-LED600DEN |
Series | Pearl EN |
Light source | DC LED |
Rated power | 600W |
Reference luminous efficacy | Approx. 100 lm/W |
Calculated luminous flux | Approx. 60,000 lm |
Reference lighting coverage | Approx. 14.1m lighting radius and 628m² area at the 10 lux edge reference level. |
Light character / CCT | Warm white / neutral white / daylight white on request. |
Input voltage | Dedicated DC input matched to the approved battery pack, portable power station or vehicle-supported arrangement. |
Power architecture | Simplified integrated electrical layout; normally no external PSU. Dedicated DC model matched to an approved battery/mobile-power solution. |
Control options | Basic on/off standard on most LED versions. |
Envelope material | Ordinary nylon, Oxford fabric or PVC, selected according to application and target cost. |
Balloon diameter | 130 / 160 / 200cm spherical envelope options. |
Stand / tripod | TP550, TP420, TP300 and TPC280 available. TP300 / TP420 / TP550 depending on diameter, height and wind condition. |
Head cable | Standard 7m; longer/custom lengths available. |
Plug options | US, EU and industrial waterproof plugs. |
Transport case | Optional waterproof engineering-plastic storage and transport case. |
Typical Applications
· Pop-up brand activations and mobile event lighting where fixed mains power is inconvenient.
· Temporary hospitality, reception or booth lighting supported by batteries, portable power stations or vehicle power.
· Rental and dealer packages requiring fast relocation and simplified electrical deployment.
· Emergency or short-term event support where cable routing needs to be minimized.
Representative Application Cases
The following are illustrative project scenarios for website communication and selection guidance; they are not presented as named customer reference projects.
Scenario | Suggested arrangement | Why this model fits |
Mobile brand activation | Use one or more units from battery/portable power, with tripod selection matched to balloon size. | Avoids long mains-cable runs while keeping a clean luminous brand object. |
Pop-up hospitality zone | Deploy around temporary reception, check-in or catering areas. | Soft light and rapid relocation suit changing event layouts. |
Rental fleet package | Pair the light with labelled cables, tripod and optional hard transport case. | Improves repeat setup and protects equipment between events. |
Customization Options
· Envelope diameter within the normal range, with 220-250cm reviewed as a special engineered option.
· White, colored or branded envelope; logo, print or vinyl-graphic treatment matched to material and reuse needs.
· Tripod, suspension or project-specific support using TP550 / TP420 / TP300 / TPC280 as the standard stand family.
· Standard 7m head cable; extended cable lengths and US / EU / industrial waterproof plugs on request.
· Optional waterproof engineering-plastic storage and transport case.
· CCT, control and electrical configuration subject to model and project scope.
· Battery pack / portable power station / vehicle-power interface matched to approved DC architecture; battery system is project-specific.
Installation and Large-Envelope Boundary
Normal Pearl envelope sizes are selected according to rated power. Custom 220-250cm spherical envelopes require a defined application, installation height, environment and support plan. At least TP550 or an industrial hand-winch lifting stand is required. For larger diameters, the Arcti architectural balloon-light family is the more appropriate reference platform.
Packaging Options
Topic | Details |
Standard packing concept | Light head/electrical assembly protected separately; envelope packed clean and dry; head cable and accessories labelled; tripod packed separately when ordered. |
Optional hard case | Waterproof engineering-plastic storage and transport case for rental fleets, dealer stock and repeated project logistics. |
Packing data | Final carton/crate size, net weight and gross weight are confirmed after the exact envelope, stand, PSU/ballast, plug and case configuration is approved. |
Documentation | Packing list, model label and basic operating information can be prepared; compliance documents are supplied only where the approved product/configuration supports them. |
Battery logistics | Lithium batteries / portable power stations may require separate dangerous-goods documentation, UN38.3 evidence and carrier-specific handling; battery shipment may be separated from the light. |
Transport Options
Method | Best use |
Courier / express air | Suitable for samples, spare parts and urgent small quantities where package size permits. |
Air freight | Suitable for urgent project shipments; oversized tripods, hard cases and batteries require route-specific review. |
Sea freight | Preferred for multiple units, large stands, cases and regular commercial shipments where transit time allows. |
Road / rail | Can be evaluated by destination and route availability. Final packing method follows carrier and handling requirements. |
Warranty and Production Cycle
Commercial item | Recommended website wording |
Warranty | Recommended website default: 12 months from shipment against manufacturing defects under normal use, subject to the final quotation / sales contract. Soft-goods wear, printing abrasion, accidental or wind/rigging damage, unauthorized modification and consumables are excluded unless otherwise agreed. Battery warranty, if supplied, follows the approved battery specification and may differ from the balloon-light equipment warranty. |
Indicative production lead time | Approx. 10-15 working days for normal quantities. Count starts after deposit / order activation, final technical confirmation and artwork approval where applicable. |
Custom-project allowance | Special graphics, PTFE material, non-standard control, 220-250cm envelope, special support, battery engineering or unusual documentation may extend lead time. |
Final commercial basis | Final warranty, lead time, packing, price and Incoterm are governed by the approved quotation / sales contract. |
Frequently Asked Questions
What balloon sizes are available? 130 / 160 / 200cm spherical envelope options. Custom 220-250cm sizes require application review, at least TP550 or an industrial hand-winch lifting stand. Larger diameters should move to the Arcti architectural balloon-light platform.
Can logos or graphics be added? Yes. Printing, color treatment and vinyl-graphic approaches are reviewed against envelope material, viewing distance, expected reuse and cleaning requirements.
Can the cable, plug or control be customized? Yes. The standard head cable is 7m; longer cable, destination-market plugs and model-appropriate control options can be configured.
How is the battery runtime defined? Runtime depends on battery usable Wh, inverter/DC efficiency, rated light power and operating level. The battery system must be matched to the approved project configuration; no universal runtime should be promised without calculation.
Is this suitable for rental fleets? Yes. Rental packages should prioritize labelled cables/accessories, replaceable soft goods, standardized stand selection and an optional hard transport case.
Request a Project-Matched Configuration
For quotation, share the event/application, quantity, operating hours, installation height, balloon diameter, voltage or DC requirement, control preference, logo/artwork, stand method, plug type and destination.
Send Your Custom Product Requirement
Tell us the product family, intended application, size, quantity, operating conditions and delivery target. Your inquiry email will automatically include the page you are viewing so our team can understand the exact product, technology or reference that led to your request.
- Product family or model of interest
- Required size, quantity and customization
- Application, installation and operating environment
- Project country, operating conditions and delivery target