Iris Tube
Iris-tube™ SLED48W-2.5M | Inflatable Linear Event Lighting
Iris-tube™ SLED48W-2.5M standard led version for events, brand display and creative lighting, with source-documented controls, installation options and project
Iris-tube™ SLED48W-2.5M
Iris-tube™ | Standard LED
1. Product Introduction & Positioning |
Iris-tube™ SLED48W-2.5M is the 2.5-meter Standard LED version in the Iris-tube™ Balloon Lights series, with a power rating of 48W. It can be configured with Dual White or RGBW LED light sources. With its compact size and flexible installation, this model is suitable for brand events, fashion shows, parties, exhibition booths, creative photo sets, and small to medium-sized stage decoration.
The product adopts an inflatable linear lighting structure with an integrated Safety Lock-air pressure-retention system, allowing the fixture to remain inflated after setup without continuously relying on an internal fan. It can be ground-supported or suspended from trusses, ceilings, or stage structures, with an average setup time of less than 5 minutes per unit.
Series positioning: Modular inflatable linear lighting with Standard LED and Pixel LED control. This model belongs to the Standard LED branch and should be selected according to venue, visual objective, noise/air structure, power/control requirements, installation method and site safety conditions.
2. Product Value & Key Advantages |
Fast Setup for Temporary Events
Each unit can be set up in less than 5 minutes, making it ideal for event projects with short installation schedules and frequent on-site adjustments.
Compact 2.5 m Size for Flexible Placement
Suitable for entrance tunnels, stage edges, booth boundaries, photo areas, runway sides, and localized decorative lighting.
Dual White / RGBW LED for Multiple Visual Needs
Can be used for ambient lighting, brand color presentation, runway decoration, party atmosphere, and creative shooting scenes.
Inflatable Structure, Lightweight and Easy to Transport
Compared with traditional rigid linear lights, this inflatable structure is easier to transport, install, dismantle, and reuse.
Multiple Control Options
Supports Bluetooth app control, cellphone control, RF 2.4G remote control, and optional DMX control, making it suitable for both simple event setups and professional stage lighting systems.
3. Detailed Technical Specifications | |
Product Name | Iris-tube™ Balloon Lights |
Model | Iris-tube™ SLED48W-2.5M |
Product Type | Standard LED Version |
Brand / Series | FENIGAL / Iris-tube™ |
Length | 2.5 m / 8.2 ft |
Diameter | 20 cm / 8.4 in |
Power | 48 W |
Light Source | Dual White or RGBW LED |
Voltage | PSU on 120 / 230 V AC; optional 12 V / 24 V DC battery |
Power Supply | AC power supply unit; optional battery pack |
Bluetooth Control | Supported, app download required |
Cellphone Control | Supported via cellphone / Balanx, etc. |
RF Remote Control | RF 2.4G remote controller available |
DMX Control | Optional purchase |
DMX Connector | 3-pin DMX connectors |
DMX Channels | 4 Channels |
Safety Rating | IP54 |
Mounting Options | Suspended / ground-supported |
Optional Accessories | Tilting floor plate / drape |
Average Setup Time | Less than 5 minutes each |
Structure Type | Inflatable linear lighting body |
Pressure-Retention System | Safety Lock-air design |
Combination Method | Can be used individually or combined in multiple units |
Recommended Applications | Brand events, fashion shows, exhibition booths, parties, photo areas, creative sets |
Technical data in this section is carried from the supplied model source. If a field is not stated in the source, it is not silently assigned a numerical value here.
5. Applications, Case Use & Application Boundary |
Recommended Applications from Source
Brand Launch Entrance Installation
Installed on both sides of an entrance tunnel or check-in area, it creates an illuminated guiding path and enhances the sense of arrival for guests.
Fashion Runway Boundary Lighting
Placed along both sides of a runway, it creates a clean linear boundary and strengthens the spatial order and futuristic atmosphere of the show.
Commercial Party DJ Area Decoration
Used as a DJ booth background or spatial decorative line to create a more rhythmic atmosphere and photo-friendly event environment.
Representative Case(s)
Case 1: Brand Pop-up Photo Area
Multiple Iris-tube™ SLED48W-2.5M units were combined into a photo backdrop, with RGBW colors matched to the brand identity. The installation was fast, the fixtures were lightweight, and the setup could be quickly dismantled and reused after the event.
Project Results:
Improved brand visual recognition
Enhanced photo and social media sharing effects
Enabled fast temporary space construction
Suitable for short-term events and pop-up projects
Case 2: Local Stage Decoration for a Fashion Show
SLED48W-2.5M units were placed along both sides of the runway to form a clean lighting structure, highlighting model movement paths without occupying excessive space.
Project Results:
Strengthened the runway line effect
Enhanced the technological atmosphere of the venue
Kept the space clean and organized
Suitable for quick setup in temporary show venues
Application Boundary
A creative linear visual fixture rather than a primary high-output work light. Source protection: IP54. Suspension/ground support, rigging loads and DMX/battery arrangements must be checked for each venue.
Case narratives are source-based representative application descriptions. They should not be converted into named-customer claims unless a separately approved customer reference exists.
6. Selection Guidance |
Iris-tube™ SLED48W-2.5M is a Standard LED inflatable linear light suitable for small to medium-sized spaces and detailed scene design. It offers fast setup, lightweight handling, flexible color control, and suspended or ground-supported installation, making it ideal for brand events, fashion shows, parties, exhibitions, and creative shoots.
7. Customization / OEM / ODM Options |
· Dual White or RGBW standard LED, or customizable RGBW Pixel LED according to model
· Bluetooth/app, RF 2.4G and optional DMX
· Suspended or ground-supported layout
· Tilting floor plate / drape accessories
· Multi-unit modular combinations and programmed geometry
Only options compatible with the selected model and production architecture will be included in the final quotation. Artwork, electrical/control layout and special installation accessories may require engineering confirmation.
8. Packing & Shipping | |
Packing dimensions / shipment N.W. & G.W. | Not specified in the supplied model source unless stated above. Final dimensions, package count and weights must be confirmed before shipment. |
Recommended export packing framework | Deflated/secured inflatable body in protective bag or carton; electrical/control parts protected separately. Reinforced plywood case or reusable flight case can be quoted when required. |
Branding / printed envelope packing | Printed or coated surfaces should be folded/protected to reduce abrasion and pressure marks; final method depends on material and graphic process. |
Shipping Options
· Air freight for samples, urgent project deliveries and small quantities, subject to package size and carrier acceptance.
· Sea freight by LCL/FCL for project quantities and cost-sensitive international delivery.
· Road/rail freight where the route and destination allow; door-to-door service may be quoted subject to destination and import conditions.
· Battery-equipped orders may require separate dangerous-goods documentation, approved battery packaging or shipment of batteries separately/locally sourced, depending on battery chemistry and carrier rules.
Packing and shipping statements in this section are commercial logistics guidance. Where the supplied source does not provide carton/case dimensions or shipment weights, those values must be confirmed from the final production configuration before dispatch.
9. Warranty, Production Lead Time & After-Sales Reference | |
Warranty - publishing reference | 12 months from shipment against manufacturing defects. Final quotation/sales contract governs. Normal wear, consumable parts, batteries/cycle aging, improper power, accidental damage, unauthorized modification and misuse are excluded unless specifically agreed. |
Production lead time - publishing reference | Typically 10-20 working days after technical/artwork approval; customized graphics, special controls or project quantities typically 15-30 working days. |
Pre-production confirmation | Confirm model, structure, dimensions, voltage, light source, controls, graphics/artwork, installation/accessories, quantity, packing and destination before production. |
After-sales support | Remote technical support and replacement-part quotation can be provided according to the confirmed order configuration. |
Spare / replacement parts | Envelope, lighting component, PSU/control part, remote/DMX accessory, blower/fan where applicable, cables and mounting accessories are subject to model configuration and availability. |
Warranty and lead-time values are added commercial publishing references for consistency with the final Sun/Pearl-style data pages; they are not stated in the supplied B0104-B0108 source sheets and must be confirmed in the formal quotation.
10. RFQ / Order Confirmation Checklist |
· Application / venue and indoor-outdoor environment
· Required model/size/shape and quantity
· Power input, voltage/frequency and battery requirement if any
· Lighting color/CCT/RGB/RGBW/Pixel requirements
· Control requirement: manual, remote, app, DMX, wireless or synchronized multi-unit operation
· Installation: floor-standing, suspended, truss, pole, water-edge/floating or other documented method
· Logo/graphics/printed slipcover artwork and print area
· Wind/site anchoring and weather conditions
· Destination, delivery date, shipping mode and packing preference
11. FAQ |
What is this model designed for?
Brand events, fashion shows, exhibition booths, parties, photo areas, creative sets
What are its main size / structure parameters?
Inflatable linear lighting body; 2.5 m / 8.2 ft
What light source and power does it use?
Dual White or RGBW LED; 48 W
How is it powered and controlled?
AC power supply unit; optional battery pack
Can it be customized?
Yes, within the family options documented in this sheet. Logo/graphics, lighting/control and installation options depend on the exact model and engineering confirmation.
Is it suitable for outdoor use?
A creative linear visual fixture rather than a primary high-output work light. Source protection: IP54. Suspension/ground support, rigging loads and DMX/battery arrangements must be checked for each venue.
What are the packing and shipping arrangements?
Final packing dimensions and shipment weight are confirmed before dispatch. Air, sea LCL/FCL, road/rail and project-specific door-to-door logistics can be quoted; battery shipments are subject to carrier rules where applicable.
What warranty and production lead time apply?
Commercial publishing reference added for this final page: 12-month warranty against manufacturing defects from shipment, with normal wear, consumables/batteries and misuse excluded unless otherwise agreed. Typically 10-20 working days after technical/artwork approval; customized graphics, special controls or project quantities typically 15-30 working days. Final quotation/sales contract governs.
12. Related Models |
Iris-tube™ SLED96W-5M, Iris-tube™ PLED36W-2.5M, Iris-tube™ PLED60W-4M, Iris-tube™ PLED72W-5M
Send Your Custom Product Requirement
Tell us the product family, intended application, size, quantity, operating conditions and delivery target. Your inquiry email will automatically include the page you are viewing so our team can understand the exact product, technology or reference that led to your request.
- Product family or model of interest
- Required size, quantity and customization
- Application, installation and operating environment
- Project country, operating conditions and delivery target