Muse
Muse-E27-72EN E27 Decorative Balloon Light | Muse EN
Muse-E27-72EN Muse EN decorative balloon light with E27 LED bulbs, remote control, AC input, selectable balloon sizes and custom branding for retail and events.
Muse-E27-72EN
Muse-E27-72EN is an entry-level Muse inflatable decorative light built around an E27 LED bulb architecture. Its 72W nominal lamp load and simplified AC-only structure are aimed at compact retail, festive and indoor commercial decoration where cost, easy bulb replacement and basic remote control matter more than professional DMX performance.
72W | 4,320 lm | 4.6 m | AC Only |
1. Product Introduction
Muse EN is the entry branch of the Muse family for retail display, seasonal decoration, compact events, starter rental packages and budget-sensitive promotional projects. It simplifies material, power and control architecture while preserving the visual identity of an inflatable light.
What Defines This Model
· 72W nominal lamp load using E27 replaceable LED bulbs.
· Approx. 4,320 lm planning output at about 60 lm/W.
· Simplified remote-controlled AC architecture for decorative, not photometric-critical, use.
· AC Only power configuration: 120V or 230V optional, 50/60Hz.
· Estimated coverage reference: approx. 4.6 m radius / 68 m² under the supplied 20,000-lm-to-10-m planning rule.
· Envelope options: Nylon / Oxford fabric / PVC.
· Balloon diameter guidance: 90 / 130 cm recommended; 160 cm optional.
· Standard head cable: 7 m; custom lengths and plug types are available.
2. Technical & Performance Data
Series / Positioning | Muse EN — Entry / Basic Decorative |
Model | Muse-E27-72EN |
Light Source / Architecture | E27 LED bulb system |
Nominal Power | 72 W |
Planning Luminous Efficacy | Approx. 60 lm/W |
Calculated Luminous Flux | Approx. 4,320 lm |
Estimated Lighting Reference | Approx. 4.6 m radius / 68 m², based on 20,000 lm ≈ 10 m radius with ~5 lux minimum edge illumination. |
Power Version | AC Only |
Input Voltage | 120V or 230V optional, 50/60Hz |
PSU / Driver Architecture | 8 × 9W E27 LED bulb / lamp-holder architecture. |
Control | Remote dimming standard depending on LED bulb/controller set |
Color / Effect Capability | Depends on selected E27 smart LED bulb/controller set; basic remote scene/color functions. |
Color Rendering Boundary | Not recommended for critical high-CRI merchandise, artwork or skin-tone display; use a dedicated high-CRI white-light product when accurate color reproduction is required. |
Envelope Material | Nylon / Oxford fabric / PVC |
Balloon Diameter | 90 / 130 cm recommended; 160 cm optional |
Head Cable | 7 m standard; longer/custom cable available. |
Plug / Connector Options | US, EU, and industrial waterproof plug/connector options; final connector depends on market, voltage and project. |
Mounting Options | TP550 / TP420 / TP300 / TPC280 tripod; suspension/truss adaptation; industrial hand-crank lifting stand for large custom envelopes. |
Standard Status | Standard E27 entry model |
Photometric Planning Note: The luminous-flux, radius and area values are engineering selection estimates derived from the agreed planning rule, not certified photometric test data. Final usable illumination changes with balloon diameter, envelope transmission, mounting height, ambient light, dimming level and site geometry. |
3. Power, Battery & Control Guidance
No DC in EN standard. E27/E40 bulb solutions are AC-only entry solutions unless redesigned.
· For battery-capable architecture at 300W and below, 24V or 48V can be evaluated; final current, cable size, connectors, BMS/protection and runtime must be engineered as a complete system.
Control logic: the E27 EN architecture uses the functions available from the selected smart LED bulb and remote/controller package. It is intentionally simpler than the DMX-based SP and SE ranges.
4. Applications, Boundaries & Representative Cases
Typical Applications
· Retail windows and shopping-mall decoration
· Seasonal and festive atmosphere lighting
· Compact parties, banquets and promotional booths
· Starter rental packages
· Budget-sensitive indoor or sheltered event decoration
Application Boundaries
· Best used for decorative ambience rather than professional synchronized DMX shows.
· Not intended as a high-output work light or high-CRI display fixture.
Representative Application Cases
Scenario | How the Model Is Used | Buyer Value |
Retail Seasonal Display | A compact shopping-centre or storefront installation uses a 90–130 cm balloon as a glowing decorative object. The replaceable E27 lamps and remote control simplify operation for non-technical staff. | Practical deployment + repeatable event package |
Small Event Accent | A banquet or pop-up venue uses several low-power units as color accents around entrances, registration areas or lounge zones rather than as the primary illumination source. | Practical deployment + repeatable event package |
Starter Rental Package | A local decorator combines the light with a compact tripod, simple remote and carton/soft-bag packing to create an entry-level rental kit with low replacement cost. | Practical deployment + repeatable event package |
Case note: the above are representative application scenarios for sales and project planning, not named-customer claims.
5. Customization, Installation & Accessories
Balloon Diameter | 90 / 130 cm recommended; 160 cm optional |
Envelope Material / Finish | Nylon / Oxford fabric / PVC |
Graphics / Branding | Logo printing, artwork, selected colors, and vinyl-graphic-friendly glossy surface where applicable. |
Head Cable | 7 m standard; extended/custom length available after confirming installation height and PSU location. |
AC Plug / Connector | US plug, EU plug, and industrial waterproof plug/connector options can be specified by market and project. |
Mounting | TP550, TP420, TP300, TPC280, hanging/truss arrangement, or industrial hand-crank lifting stand according to envelope size and site conditions. |
Transport Protection | Optional waterproof engineering-plastic storage/transport case for rental fleets and repeated logistics movement. |
Control | Remote dimming standard depending on LED bulb/controller set |
DC Upgrade Path | EN is AC-only as standard. If DC is required, upgrade the project to the SE DC power architecture. |
Tripod / Support Selection
Support | Recommended Use | Selection Note |
TP550 | Heavy-duty 5.5 m tripod. Preferred for larger envelopes, higher installations and as the minimum tripod class for 220–250 cm custom balloons. | Confirm height, wind exposure and balloon size before quotation. |
TP420 | 4.2 m professional tripod for many 130–200 cm commercial event installations. | Confirm height, wind exposure and balloon size before quotation. |
TP300 | 3.0 m compact tripod for smaller balloons and lower-height indoor/event layouts. | Confirm height, wind exposure and balloon size before quotation. |
TPC280 | Compact/cost-sensitive support option for smaller entry configurations. | Confirm height, wind exposure and balloon size before quotation. |
Industrial hand-crank lifting stand | Recommended for 220–250 cm custom balloons or projects requiring controlled lifting and stronger site support. | Recommended for controlled lifting / large custom envelope. |
Large Balloon Boundary: 90 / 130 / 160 / 200 cm are the normal selectable balloon sizes. 220–250 cm is a special custom range and requires application review; use at least TP550 when a tripod solution is approved, or an industrial hand-crank lifting stand. For substantially larger diameters, refer to the Arcti architectural balloon-light family. |
6. Packing, Storage & Transport Options
Item / Method | Description | Commercial Note |
Economy packing | Export carton and/or soft transport bag for cost-sensitive shipments and simple storage. | Final dimensions/cost depend on selected balloon, tripod, PSU and order quantity. |
Professional packing | Optional waterproof engineering-plastic storage and transport case for rental fleets, outdoor projects and repeated handling. | Final dimensions/cost depend on selected balloon, tripod, PSU and order quantity. |
Tripod / stand packing | Tripod or lifting stand is packed separately according to selected model and shipment method. | Final dimensions/cost depend on selected balloon, tripod, PSU and order quantity. |
Air / express | Suitable for samples, urgent replacements and smaller orders; chargeable weight depends heavily on balloon/stand packing volume. | Final dimensions/cost depend on selected balloon, tripod, PSU and order quantity. |
Sea / consolidated freight | Recommended for larger quantities, multiple stands and transport cases where volume efficiency is more important than speed. | Final dimensions/cost depend on selected balloon, tripod, PSU and order quantity. |
Local freight / project delivery | Can be coordinated case by case with the final Incoterm, destination, order volume and packing configuration. | Final dimensions/cost depend on selected balloon, tripod, PSU and order quantity. |
7. Commercial Data & Quality Reference
Warranty | Proposed standard commercial reference: 12-month limited warranty. Final warranty start point, scope, exclusions and replacement/shipping responsibility must follow the approved quotation or sales contract. |
Production Lead Time | Typical planning range: approximately 10–25 working days after order/payment, artwork and technical configuration are confirmed. Quantity, custom envelope/graphics, special cables/connectors and transport cases can change the schedule. |
Customization Confirmation | Custom size, artwork, material, DC architecture, plug/connector, cable length and mounting requirements should be confirmed before production. |
Pre-shipment Check | Recommended inspection includes inflation/air system check, lighting and control function, PSU/driver function, cable/connector check, basic appearance and packing verification. |
Quotation Basis | Final price and delivery depend on model, quantity, balloon size/material, control and power version, tripod, transport case, logo/graphic requirements, destination and Incoterm. |
Documentation | Datasheet, quotation, packing information and available electrical/operation documents can be supplied with the confirmed project package. |
8. Buyer Selection & Quotation Checklist
· Application: wedding / exhibition / brand activation / retail / hospitality / festival / rental / other.
· Model and power version: Muse-E27-72EN / AC Only.
· Required balloon diameter and shape.
· Installation height and mounting method: TP550 / TP420 / TP300 / TPC280 / hanging / hand-crank stand.
· Required operating time and whether AC, battery, backup or mobile power station is needed.
· DMX, remote-control and preset-effect requirements.
· Envelope material, color, logo, artwork or vinyl graphic requirements.
· Head-cable length, AC plug/industrial connector and destination voltage.
· Packing level: economy carton/soft bag or waterproof engineering-plastic transport case.
· Quantity, destination, desired delivery date and preferred shipping method / Incoterm.
CTA: Send the above project information to HAFE / BTCOOPS for the final configuration, feasibility check, quotation, packing plan and delivery schedule. |
9. Frequently Asked Questions
Can this model create both colors and white light?
For RGB+W models, yes. RGB plus white channels can create hundreds of color and white-tone combinations through DMX, panel settings or remote functions depending on configuration. E27 models depend on the selected smart bulb/controller set.
Is it suitable for high color-rendering product display?
Not as the first choice. RGB mixing prioritizes color effects and atmosphere. For accurate color reproduction, use a dedicated high-CRI white-light product.
What balloon sizes are available?
90 / 130 cm recommended; 160 cm optional. Larger 220–250 cm sizes always require application and mounting feasibility review.
Which tripod should I choose?
TP300/TPC280 are suited to smaller and lower installations; TP420 is a common professional choice; TP550 is preferred for larger/high installations and is the minimum tripod class for 220–250 cm custom balloons.
Can the EN model be made as DC?
Not as a standard EN product. A DC request should move to the SE DC power architecture for engineering and quotation.
Can the head cable and plug be customized?
Yes. The standard head cable is 7 m. Longer lengths and US, EU or industrial waterproof plug/connector options can be specified.
Can we add our logo or vinyl graphic?
Yes. Branding options include printed graphics and selected surface treatments. SP and selected SE glossy finishes are especially suitable when vinyl graphic compatibility is important.
Send Your Custom Product Requirement
Tell us the product family, intended application, size, quantity, operating conditions and delivery target. Your inquiry email will automatically include the page you are viewing so our team can understand the exact product, technology or reference that led to your request.
- Product family or model of interest
- Required size, quantity and customization
- Application, installation and operating environment
- Project country, operating conditions and delivery target