Muse
Muse-RGBW900SP-DC RGB+W Balloon Light | Muse SP 900W DC
Muse-RGBW900SP-DC 900W RGB+W Muse SP balloon light with DC power, event control options, multiple balloon sizes, tripod choices and custom branding
Muse-RGBW900SP-DC
Muse-RGBW900SP-DC is a 900W RGB+W inflatable balloon light in the Muse SP family, configured as DC. It is positioned for premium event decoration, brand activation and professional rental use, with flame-retardant nylon as the starting envelope material, optional glossy graphic-friendly finish, optional PTFE-treated fiberglass fabric, and an external professional PSU/control architecture. This page represents a custom feasibility inquiry configuration only; it is not a standard battery/AC+DC product.
900W | 72,000 lm | 19.0 m | DC |
1. Product Introduction
Muse SP is the premium branch of the Muse event decorative and advertising balloon-light family. It is intended for professional event suppliers, agencies, exhibition contractors, hospitality projects and rental fleets that value stronger material options, branded PSU components and deeper RGB+W control.
What Defines This Model
· CUSTOM FEASIBILITY ONLY — not a standard battery or AC+DC configuration.
· 900W RGB+W LED system with average planning efficacy of about 80 lm/W.
· Approx. 72,000 lm calculated luminous flux for preliminary project selection.
· RGB+W mixing supports hundreds of colors and white-tone combinations, but is not intended for high color-rendering product display.
· DC power configuration: Custom only after feasibility review.
· Estimated coverage reference: approx. 19.0 m radius / 1,131 m² under the supplied 20,000-lm-to-10-m planning rule.
· Envelope options: FR nylon; glossy finish optional; PTFE-treated fiberglass optional.
· Balloon diameter guidance: 130 / 160 / 200 cm recommended; 220–250 cm custom after feasibility review.
· Standard head cable: 7 m; custom lengths and plug types are available.
2. Technical & Performance Data
Series / Positioning | Muse SP — Premium / Professional |
Model | Muse-RGBW900SP-DC |
Light Source / Architecture | RGB+W LED light engine |
Nominal Power | 900 W |
Planning Luminous Efficacy | Approx. 80 lm/W |
Calculated Luminous Flux | Approx. 72,000 lm |
Estimated Lighting Reference | Approx. 19.0 m radius / 1,131 m², based on 20,000 lm ≈ 10 m radius with ~5 lux minimum edge illumination. |
Power Version | DC |
Input Voltage | Custom only after feasibility review |
PSU / Driver Architecture | Non-standard high-power hybrid/DC architecture; feasibility and component selection must be reviewed project by project. |
Control | DMX standard if feasible; optional remote; PSU panel effects/channel tuning |
Color / Effect Capability | Hundreds of colors and white-tone combinations through RGB+W mixing and scene control. |
Color Rendering Boundary | Not recommended for critical high-CRI merchandise, artwork or skin-tone display; use a dedicated high-CRI white-light product when accurate color reproduction is required. |
Envelope Material | FR nylon; glossy finish optional; PTFE-treated fiberglass optional |
Balloon Diameter | 130 / 160 / 200 cm recommended; 220–250 cm custom after feasibility review |
Head Cable | 7 m standard; longer/custom cable available. |
Plug / Connector Options | US, EU, and industrial waterproof plug/connector options; final connector depends on market, voltage and project. |
Mounting Options | TP550 / TP420 / TP300 / TPC280 tripod; suspension/truss adaptation; industrial hand-crank lifting stand for large custom envelopes. |
Standard Status | Custom feasibility inquiry only; not standard |
Photometric Planning Note: The luminous-flux, radius and area values are engineering selection estimates derived from the agreed planning rule, not certified photometric test data. Final usable illumination changes with balloon diameter, envelope transmission, mounting height, ambient light, dimming level and site geometry. |
3. Power, Battery & Control Guidance
600W above to 900W has no standard DC support. If required, feasibility must be discussed case by case; parallel battery use requires customer capability and safe maintenance, or use local AC mobile power station.
· 900W is intended as an AC-powered Muse SP class. Standard AC+DC/DC support is not offered above the regular 600W DC limit.
· If a special 900W battery/hybrid system is requested, feasibility must be reviewed separately. Any parallel-battery arrangement is only appropriate when the customer has the engineering capability to operate and maintain it safely.
· A locally sourced AC mobile power station can be a practical alternative because it avoids shipping large traction batteries with the lighting product and can be matched to local regulations.
Control logic: DMX is the professional default for SP/SE models as listed; optional remote control simplifies standalone use. PSU-panel functions can include color selection, jump change, smooth fade, strobe and channel-level output setting depending on the approved controller/PSU configuration.
4. Applications, Boundaries & Representative Cases
Typical Applications
· Premium corporate events and product launches
· Brand activations and exhibition feature lighting
· Luxury weddings and hospitality atmosphere lighting
· Professional rental packages and agency event inventories
· Decorative wayfinding and visual focal points at temporary venues
Application Boundaries
· RGB+W is optimized for color effects and atmosphere; use a dedicated high-CRI white-light product when accurate merchandise or skin-tone rendering is the priority.
· For long-duration battery operation, power consumption becomes substantial; AC supply is normally preferred for 6-hour-plus events.
· Battery/AC+DC implementation above 600W is not standard and requires separate feasibility review before quotation.
Representative Application Cases
Scenario | How the Model Is Used | Buyer Value |
Large Premium Event | A 160–200 cm Muse SP balloon becomes a dominant decorative focal point for launch conferences, hospitality events or large exhibition spaces, with higher output supporting larger venues. | Practical deployment + repeatable event package |
Scenic Brand Feature | A premium envelope finish and custom graphic treatment create a high-visibility illuminated object for brand campaigns, red-carpet zones or sponsor backdrops. | Visual atmosphere + branding flexibility |
High-Power Temporary Installation | The standard 900W recommendation is AC-powered. If a mobile power station is needed, a locally sourced AC unit can be specified to suit site runtime, transport rules and charging availability. | Practical deployment + repeatable event package |
Case note: the above are representative application scenarios for sales and project planning, not named-customer claims.
5. Customization, Installation & Accessories
Balloon Diameter | 130 / 160 / 200 cm recommended; 220–250 cm custom after feasibility review |
Envelope Material / Finish | FR nylon; glossy finish optional; PTFE-treated fiberglass optional |
Graphics / Branding | Logo printing, artwork, selected colors, and vinyl-graphic-friendly glossy surface where applicable. |
Head Cable | 7 m standard; extended/custom length available after confirming installation height and PSU location. |
AC Plug / Connector | US plug, EU plug, and industrial waterproof plug/connector options can be specified by market and project. |
Mounting | TP550, TP420, TP300, TPC280, hanging/truss arrangement, or industrial hand-crank lifting stand according to envelope size and site conditions. |
Transport Protection | Optional waterproof engineering-plastic storage/transport case for rental fleets and repeated logistics movement. |
PSU / Control | Professional external PSU/control box with branded power components; DMX standard, remote optional, panel effect selection and channel tuning. |
High-Power DC Feasibility | Not standard. Requires dedicated project review; parallel battery operation is only for customers able to design, operate and maintain the system safely. |
Tripod / Support Selection
Support | Recommended Use | Selection Note |
TP550 | Heavy-duty 5.5 m tripod. Preferred for larger envelopes, higher installations and as the minimum tripod class for 220–250 cm custom balloons. | Confirm height, wind exposure and balloon size before quotation. |
TP420 | 4.2 m professional tripod for many 130–200 cm commercial event installations. | Confirm height, wind exposure and balloon size before quotation. |
TP300 | 3.0 m compact tripod for smaller balloons and lower-height indoor/event layouts. | Confirm height, wind exposure and balloon size before quotation. |
TPC280 | Compact/cost-sensitive support option for smaller entry configurations. | Confirm height, wind exposure and balloon size before quotation. |
Industrial hand-crank lifting stand | Recommended for 220–250 cm custom balloons or projects requiring controlled lifting and stronger site support. | Recommended for controlled lifting / large custom envelope. |
Large Balloon Boundary: 90 / 130 / 160 / 200 cm are the normal selectable balloon sizes. 220–250 cm is a special custom range and requires application review; use at least TP550 when a tripod solution is approved, or an industrial hand-crank lifting stand. For substantially larger diameters, refer to the Arcti architectural balloon-light family. |
6. Packing, Storage & Transport Options
Item / Method | Description | Commercial Note |
Economy packing | Export carton and/or soft transport bag for cost-sensitive shipments and simple storage. | Final dimensions/cost depend on selected balloon, tripod, PSU and order quantity. |
Professional packing | Optional waterproof engineering-plastic storage and transport case for rental fleets, outdoor projects and repeated handling. | Final dimensions/cost depend on selected balloon, tripod, PSU and order quantity. |
Tripod / stand packing | Tripod or lifting stand is packed separately according to selected model and shipment method. | Final dimensions/cost depend on selected balloon, tripod, PSU and order quantity. |
Air / express | Suitable for samples, urgent replacements and smaller orders; chargeable weight depends heavily on balloon/stand packing volume. | Final dimensions/cost depend on selected balloon, tripod, PSU and order quantity. |
Sea / consolidated freight | Recommended for larger quantities, multiple stands and transport cases where volume efficiency is more important than speed. | Final dimensions/cost depend on selected balloon, tripod, PSU and order quantity. |
Local freight / project delivery | Can be coordinated case by case with the final Incoterm, destination, order volume and packing configuration. | Final dimensions/cost depend on selected balloon, tripod, PSU and order quantity. |
7. Commercial Data & Quality Reference
Warranty | Proposed standard commercial reference: 12-month limited warranty. Final warranty start point, scope, exclusions and replacement/shipping responsibility must follow the approved quotation or sales contract. |
Production Lead Time | Typical planning range: approximately 10–25 working days after order/payment, artwork and technical configuration are confirmed. Quantity, custom envelope/graphics, special cables/connectors and transport cases can change the schedule. |
Customization Confirmation | Custom size, artwork, material, DC architecture, plug/connector, cable length and mounting requirements should be confirmed before production. |
Pre-shipment Check | Recommended inspection includes inflation/air system check, lighting and control function, PSU/driver function, cable/connector check, basic appearance and packing verification. |
Quotation Basis | Final price and delivery depend on model, quantity, balloon size/material, control and power version, tripod, transport case, logo/graphic requirements, destination and Incoterm. |
Documentation | Datasheet, quotation, packing information and available electrical/operation documents can be supplied with the confirmed project package. |
8. Buyer Selection & Quotation Checklist
· Application: wedding / exhibition / brand activation / retail / hospitality / festival / rental / other.
· Model and power version: Muse-RGBW900SP-DC / DC.
· Required balloon diameter and shape.
· Installation height and mounting method: TP550 / TP420 / TP300 / TPC280 / hanging / hand-crank stand.
· Required operating time and whether AC, battery, backup or mobile power station is needed.
· DMX, remote-control and preset-effect requirements.
· Envelope material, color, logo, artwork or vinyl graphic requirements.
· Head-cable length, AC plug/industrial connector and destination voltage.
· Packing level: economy carton/soft bag or waterproof engineering-plastic transport case.
· Quantity, destination, desired delivery date and preferred shipping method / Incoterm.
CTA: Send the above project information to HAFE / BTCOOPS for the final configuration, feasibility check, quotation, packing plan and delivery schedule. |
9. Frequently Asked Questions
Can this model create both colors and white light?
For RGB+W models, yes. RGB plus white channels can create hundreds of color and white-tone combinations through DMX, panel settings or remote functions depending on configuration. E27 models depend on the selected smart bulb/controller set.
Is it suitable for high color-rendering product display?
Not as the first choice. RGB mixing prioritizes color effects and atmosphere. For accurate color reproduction, use a dedicated high-CRI white-light product.
What balloon sizes are available?
130 / 160 / 200 cm recommended; 220–250 cm custom after feasibility review. Larger 220–250 cm sizes always require application and mounting feasibility review.
Which tripod should I choose?
TP300/TPC280 are suited to smaller and lower installations; TP420 is a common professional choice; TP550 is preferred for larger/high installations and is the minimum tripod class for 220–250 cm custom balloons.
Is this a standard 900W battery model?
No. Standard DC/AC+DC support stops at the regular 600W level. A 900W battery/hybrid request requires separate feasibility evaluation, or an AC mobile power station sourced locally may be more practical.
Can the head cable and plug be customized?
Yes. The standard head cable is 7 m. Longer lengths and US, EU or industrial waterproof plug/connector options can be specified.
Can we add our logo or vinyl graphic?
Yes. Branding options include printed graphics and selected surface treatments. SP and selected SE glossy finishes are especially suitable when vinyl graphic compatibility is important.
Send Your Custom Product Requirement
Tell us the product family, intended application, size, quantity, operating conditions and delivery target. Your inquiry email will automatically include the page you are viewing so our team can understand the exact product, technology or reference that led to your request.
- Product family or model of interest
- Required size, quantity and customization
- Application, installation and operating environment
- Project country, operating conditions and delivery target