Aero
Aero AR80-CA300X500 | Creative Inflatable Lighting Decorations
Aero AR80-CA300X500 creative inflatable lighting decorations for events, brand display and creative lighting, with source-documented controls, installation o...
Aero AR80-CA300X500
AERO™ | CA / Constant Air Blowing
1. Product Introduction & Positioning |
Aero AR80-CA300X500 is an Arch-shaped inflatable lighting decoration with a Ø80cm base and an overall size of 300×500cm. It uses the AERO™ CA / Constant Air Blowing design and is suitable for event entrances, race start and finish points, brand gateways, and outdoor photo installations.
Series positioning: Inflatable illuminated shapes and large-format event lighting decorations. This model belongs to the CA / Constant Air Blowing branch and should be selected according to venue, visual objective, noise/air structure, power/control requirements, installation method and site safety conditions.
2. Product Value & Key Advantages |
Arch shape is ideal for gateways and entrance use.
Large size provides clear visibility and passage.
Continuous air blowing supports long-duration display.
Good for branding, sponsorship, and wayfinding.
Easy to combine with other models for a complete entrance system.
3. Detailed Technical Specifications | |
Model | Aero AR80-CA300X500 |
Product Series | AERO™ |
Design Type | CA / Constant Air Blowing |
Shape | Arch |
Base Diameter | Ø80cm |
Envelope Size | 300×500cm |
Light Source | Simple LED 20W projector or DMX512 150W RGBW LED Projection Lamp |
Supply Voltage | 230VAC/50Hz or 220–240VAC 50/60Hz |
Average Set-Up Time | Approx. 15 minutes |
Wind Resistance | 30km/h |
Typical Use | Event entrance, race start / finish, brand gateway, photo entrance installation |
Technical data in this section is carried from the supplied model source. If a field is not stated in the source, it is not silently assigned a numerical value here.
4. Source Application / Customer Configuration Table | |
Item | Content |
Project Requirement | Create a visible race start and finish gateway |
Recommended Model | Aero AR80-CA300X500 |
Recommended Quantity | 1–2 units |
Layout | Start line, finish line, or main entrance |
Light Source | Simple LED or optional DMX512 RGBW LED |
Branding | Race logo, sponsor marks, and event text applied |
5. Applications, Case Use & Application Boundary |
Recommended Applications from Source
Event gateways
Marathon start/finish areas
Exhibition entrances
Brand welcome zones
Commercial photo spots
Representative Case(s)
Case: Outdoor Arch for a Marathon Event
Application Effects:
Clearly marks key race points.
Improves nighttime visibility.
Enhances sponsor exposure.
Creates a strong photo opportunity.
Application Boundary
Designed primarily as event/decorative lighting rather than certified task or safety illumination. The CA version depends on continuous airflow from its fan/blower and is not a quiet-operation product. Source wind limit: 30km/h. Use outdoors only with suitable anchoring and site supervision.
Case narratives are source-based representative application descriptions. They should not be converted into named-customer claims unless a separately approved customer reference exists.
6. Selection Guidance |
Aero AR80-CA300X500 is recommended for entrance and gateway applications. Anchoring and wind checks should be applied according to site conditions.
7. Customization / OEM / ODM Options |
· Envelope shape/size within the documented AERO family range
· Vinyl graphics, logos, messages, designs and patterns
· Simple LED projector, LED strips or DMX512 RGBW projection configuration as supported by the model
· Market voltage/version according to documented AL/CA architecture
Only options compatible with the selected model and production architecture will be included in the final quotation. Artwork, electrical/control layout and special installation accessories may require engineering confirmation.
8. Packing & Shipping | |
Packing dimensions / shipment N.W. & G.W. | Not specified in the supplied model source unless stated above. Final dimensions, package count and weights must be confirmed before shipment. |
Recommended export packing framework | Deflated/secured inflatable body in protective bag or carton; electrical/control parts protected separately. Reinforced plywood case or reusable flight case can be quoted when required. |
Branding / printed envelope packing | Printed or coated surfaces should be folded/protected to reduce abrasion and pressure marks; final method depends on material and graphic process. |
Shipping Options
· Air freight for samples, urgent project deliveries and small quantities, subject to package size and carrier acceptance.
· Sea freight by LCL/FCL for project quantities and cost-sensitive international delivery.
· Road/rail freight where the route and destination allow; door-to-door service may be quoted subject to destination and import conditions.
Packing and shipping statements in this section are commercial logistics guidance. Where the supplied source does not provide carton/case dimensions or shipment weights, those values must be confirmed from the final production configuration before dispatch.
9. Warranty, Production Lead Time & After-Sales Reference | |
Warranty - publishing reference | 12 months from shipment against manufacturing defects. Final quotation/sales contract governs. Normal wear, consumable parts, batteries/cycle aging, improper power, accidental damage, unauthorized modification and misuse are excluded unless specifically agreed. |
Production lead time - publishing reference | Typically 10-20 working days after technical/artwork approval; customized graphics, special controls or project quantities typically 15-30 working days. |
Pre-production confirmation | Confirm model, structure, dimensions, voltage, light source, controls, graphics/artwork, installation/accessories, quantity, packing and destination before production. |
After-sales support | Remote technical support and replacement-part quotation can be provided according to the confirmed order configuration. |
Spare / replacement parts | Envelope, lighting component, PSU/control part, remote/DMX accessory, blower/fan where applicable, cables and mounting accessories are subject to model configuration and availability. |
Warranty and lead-time values are added commercial publishing references for consistency with the final Sun/Pearl-style data pages; they are not stated in the supplied B0104-B0108 source sheets and must be confirmed in the formal quotation.
10. RFQ / Order Confirmation Checklist |
· Application / venue and indoor-outdoor environment
· Required model/size/shape and quantity
· Power input, voltage/frequency and battery requirement if any
· Lighting color/CCT/RGB/RGBW/Pixel requirements
· Control requirement: manual, remote, app, DMX, wireless or synchronized multi-unit operation
· Installation: floor-standing, suspended, truss, pole, water-edge/floating or other documented method
· Logo/graphics/printed slipcover artwork and print area
· Wind/site anchoring and weather conditions
· Destination, delivery date, shipping mode and packing preference
11. FAQ |
What is this model designed for?
Event entrance, race start / finish, brand gateway, photo entrance installation
What are its main size / structure parameters?
CA / Constant Air Blowing; Arch
What light source and power does it use?
Simple LED 20W projector or DMX512 150W RGBW LED Projection Lamp
How is it powered and controlled?
230VAC/50Hz or 220–240VAC 50/60Hz
Can it be customized?
Yes, within the family options documented in this sheet. Logo/graphics, lighting/control and installation options depend on the exact model and engineering confirmation.
Is it suitable for outdoor use?
Designed primarily as event/decorative lighting rather than certified task or safety illumination. The CA version depends on continuous airflow from its fan/blower and is not a quiet-operation product. Source wind limit: 30km/h. Use outdoors only with suitable anchoring and site supervision.
What are the packing and shipping arrangements?
Final packing dimensions and shipment weight are confirmed before dispatch. Air, sea LCL/FCL, road/rail and project-specific door-to-door logistics can be quoted; battery shipments are subject to carrier rules where applicable.
What warranty and production lead time apply?
Commercial publishing reference added for this final page: 12-month warranty against manufacturing defects from shipment, with normal wear, consumables/batteries and misuse excluded unless otherwise agreed. Typically 10-20 working days after technical/artwork approval; customized graphics, special controls or project quantities typically 15-30 working days. Final quotation/sales contract governs.
12. Related Models |
Aero AR24-CA12X20FT, Aero CO24-CA10FT, Aero CO24-CA13FT, Aero CO24-CA16.5FT, Aero CO50-CA200, Aero CO50-CA300
Send Your Custom Product Requirement
Tell us the product family, intended application, size, quantity, operating conditions and delivery target. Your inquiry email will automatically include the page you are viewing so our team can understand the exact product, technology or reference that led to your request.
- Product family or model of interest
- Required size, quantity and customization
- Application, installation and operating environment
- Project country, operating conditions and delivery target