Moon EN 3.0m LED 200W

Entry / Promotional spherical event lighting & branding balloon

MOON-EN-30-LED200   •   3.0 m   •   LED 200W

Helium-float OK — float-capable across the full recommended height band

Moon EN 3.0m LED 200W is a recommended spherical Moon configuration for helium-floating event branding or air-filled hanging use. This page converts the engineering rules into a sales-ready model sheet with float assessment, lighting planning and branding notes.

1. What Defines This Model

· Series positioning: Moon EN — Entry / Promotional.

· Envelope: Printable PVC with branding method: Digital printing / spray printing on PVC surface for logos and campaign graphics.

· Source / output: LED 200W with estimated luminous output 20,000 lm.

· Helium geometry: theoretical sphere volume 14.1 m³; surface area 28.3 m².

· Operating height reference: 8-15 m; float classification: Helium-float OK — float-capable across the full recommended height band.

· Lighting-planning reference: 32.7 m (planning reference only) — intended for ambience, branding and limited near-object recognition rather than fine task work.

2. Technical & Performance Data

Engineering interpretation: estimated net lift is a planning value derived from the stated envelope mass basis, light-head mass basis and cable-mass assumptions. Final usable payload must also allow for seams, valves, rigging hardware, artwork, tether lines, wind load and project safety factor.

3. Recommended Applications

· Cost-sensitive event balloon lighting and night-time atmosphere branding

· Exhibition halls, atriums, retail activations and shopping-mall events

· Festival lawns, wedding spaces, hospitality venues and concert peripheral areas

Application Boundary

· Moon is intended for overhead ambience, branding, visual signaling and limited near-object recognition.

· It is not intended as fine-detail task lighting.

· In clear weather and open sightlines, decorative and brand-display arrangements can work as visible overhead markers in roughly the 0.5–2 km range.

4. Representative Application Cases

The following are representative project-use profiles for specification and sales guidance; they are not claims of named completed installations unless separately documented.

· Festival lawn / corporate activation: 3.0 m Moon at 8-15 m for overhead brand presence, broad ambient fill and crowd-orientation support.

· Exhibition hall / shopping-mall atrium: digitally printed sphere with LED source, planned around 32.7 m (planning reference only) and clear indoor sightlines.

· RGB / white LED activation: color or brightness control can be integrated according to the selected series, allowing branded color scenes and event-program synchronization.

5. Customization Options

· Sphere size: standard configuration shown here is 3.0 m; larger custom diameters can be engineered subject to source size, envelope load, wind and rigging limits.

· Envelope / graphics: Digital printing / spray printing on PVC surface for logos and campaign graphics.

· Artwork: logo, slogan, sponsor marks, campaign graphics, multi-panel artwork and placement can be adapted to the visible viewing angles.

· Light source: this page uses LED 200W; alternative white/RGB LED, HMI, metal halide or tungsten families are available only where the diameter/series rules permit.

· Control: White or RGB LED; AC version with basic switching.

· Rigging / tethering: suspension points, tether lines, cable length, ballast/PSU cases, anchor interfaces and inflation accessories can be configured for the project.

· Packaging: reinforced transport bag, protective export case, flight case or wooden crate options can be selected according to shipment method and reuse frequency.

· EN PVC mass basis: float calculations use 250–300 g/m² PVC envelope weight range; actual finished weight must be rechecked after printing, seams, valves and hardware are finalized.

6. Packaging & Transport

Shipping Options

· Courier / express: practical mainly for samples, small accessories, spare parts or compact light-source/control cases; dimensional weight should be checked before booking.

· Air freight: suitable for time-sensitive event projects; balloon envelope and lighting/control cases can be separated to optimize chargeable volume and handling.

· Sea freight: preferred for large spheres, multiple sets, flight cases or wooden crates where transit time is less critical.

· Consolidated / project cargo: multiple Moon units, cables, cases and accessories can be packed by project and labeled for site deployment.

· Helium note: helium is normally sourced at the destination. The standard product shipment is the balloon system and accessories, not filled helium cylinders.

7. Warranty & Production Lead Time

8. Inquiry Information Required

· Confirm target model / diameter: MOON-EN-30-LED200 / 3.0 m or requested custom diameter.

· Target installation: helium floating or air-filled hanging; target operating height and expected event duration.

· Country / city of use, indoor/outdoor status, expected wind exposure and site anchoring or suspension conditions.

· Logo / artwork files, print coverage, viewing direction and brand-color requirements.

· Light-source / control request: LED 200W; White or RGB LED; AC version with basic switching.

· Required quantity, delivery destination, target arrival date and preferred transport method.

· Any flight case, spare parts, replacement envelope, power cable, ballast/PSU or backup-lamp requirement.

9. FAQ

10. Related Models

· Moon EN 2.5m LED 400W — LED 400W · 2.5m sphere · EN | Helium-float OK

· Moon EN 3.0m LED 400W — LED 400W · 3.0m sphere · EN | Helium-float OK

· Moon EN 3.0m LED 600W — LED 600W · 3.0m sphere · EN | Helium-float OK

11. Call to Action