Columus

Home>Products>By Series>Balloon Light Product>Columus

Professional Product Detail

Columus LED800AP 800W Low-Noise LED Inflatable Light Tower

Name: Columus LED800AP 800W Low-Noise LED Inflatable Light Tower
Brand: BTCOOPS

Columus LED800AP 800W low-noise led inflatable light tower for portable temporary area lighting, with 2-5 m tower options and project customization.

Category: Columus

COLUMUS™

Columus LED800AP - Technical & Commercial Data Sheet

Low-Noise LED | 800 W | AP Advance Pro

Final English master page for website, quotation support, SEO/GEO and sales use

PRODUCT STATUS: Custom-engineered / project configuration

1. Product Introduction & Positioning

Columus LED800AP is a custom-engineered low-noise LED inflatable light tower in the AP Advance Pro family. It uses a sealed-air structure with distributed LED modules or strips integrated into the lighting envelope, eliminating continuous inflation-blower noise during normal operation while supporting premium color quality and advanced controls.

Series positioning: AP - Advance Pro (Premium / low-noise custom-engineered). The tower uses multi-layer sealed inner air cell plus protective/diffusing outer envelope; material stack is project-engineered and is intended for film and broadcast support, premium event perimeters, acoustically sensitive locations, exhibitions, ceremonies and specialist custom projects. This model should be selected from required illuminance, work-zone size, tower height, power source, restart behavior, color/flicker needs and environmental conditions rather than lamp wattage alone.

Model note: LED layout may use distributed strips/modules inside the sealed-air / outer-envelope structure; final thermal and photometric design is project-specific.

2. At a Glance
Item	Data	Item	Data
Model	LED800AP	Series	AP - Advance Pro
Light source	Low-Noise LED	Rated light power	800 W
Reference output	90,000-120,000 lm design target	Recommended height	3.0-4.0 m
Max. reference area (>=1 lx)	Approx. 10,500 m²	Reference area at 10 lx	Approx. 2,100 m²
Practical 10-20 lx area	Approx. 1,050-2,100 m²	Reference center illuminance at 4 m	Approx. 1,995 lx

Photometric values: MH400/MH1000/XN200/XN400 anchor values trace to legacy Columus data. Other outputs/areas are engineering planning references derived for product selection and must be replaced by final measured photometric data before being stated as guaranteed performance.

3. Detailed Technical Specifications
Light-source platform	High-output LED modules / strips integrated into the sealed-air AP structure
Rated light power	800 W
Reference system output	90,000-120,000 lm design target
Color temperature	3200 K / 4000 K / 5600 K planning options; other CCT by project
Color rendering	Ra >=90 preferred planning basis for premium AP projects; higher color-quality packages by project
Flicker behavior	Professional low-flicker driver is recommended; camera/high-speed requirement must be stated at enquiry stage
Start / restrike	Instant
Light-source service life	LED module/driver life is component and thermal-design dependent
Power supply	AC mains / generator through professional LED driver; specialized low-voltage architecture can be engineered
Control	On/Off, dimming, DMX, remote / APP control and project-specific interfaces
Tower architecture	Sealed-air / low-noise architecture designed to avoid continuous inflation-blower noise during normal operation
Envelope material	Multi-layer sealed inner air cell plus protective/diffusing outer envelope; material stack is project-engineered
Tower-height options	2.0 / 2.5 / 3.0 / 4.0 / 5.0 m project options; not every height is recommended for every light head
Recommended height	3.0-4.0 m
Typical tower body	Approx. 400 mm class tower body; final head/base dimensions depend on configuration
Inflation / blower	No continuous inflation blower during normal operation; inflation/pressure-maintenance arrangement is project-engineered
Typical deployment	Project-specific; initial inflation and setup are normally one-person or two-person depending on sealed-air size and head package
Outdoor / wind / IP	Outdoor weather-resistant construction. Exact declared IP rating and wind limit must be confirmed for the approved model, electrical package and anchoring method.

4. Lighting Performance & Application Boundary

For project planning, LED800AP is estimated to provide a maximum low-level illumination footprint of approximately 10,500 m² at the 1-lux boundary and approximately 2,100 m² at 10 lux. For general orientation, emergency staging and broad work-zone lighting, a more practical 10-20 lux planning range is approximately 1,050-2,100 m². Applications requiring 50-100 lux or more will cover a much smaller area and should be checked with a project-specific lux layout.

Application boundary: Custom-engineered premium solution; not intended as the lowest-cost mass-market option.

Recommended Applications

· Film/broadcast support areas

· Premium event and ceremony zones

· Exhibitions and acoustically sensitive projects

· Special custom temporary lighting

Representative Application Cases

Case 1. Quiet premium event support: broad diffused illumination around ceremony, hospitality or exhibition areas without continuous inflation-blower noise.

Case 2. Film / broadcast support zone: low-flicker, high-CRI LED illumination for technical areas, backlots and support spaces.

Case 3. Special custom installation: temporary lighting where noise, visual integration and advanced control are more important than lowest purchase price.

Cases above are representative application scenarios for positioning and selection. They are not claims of a named customer installation unless supported by a separately approved project reference.

5. Customer Value & Selection Guidance

· No continuous blower noise during normal operation

· Premium CRI / low-flicker design path

· Advanced control integration

· Custom visual and acoustic engineering

Choose LED800AP when its low-noise led behavior, 800 W output class and AP series positioning match the project priorities. If the customer needs different restart behavior, control sophistication, budget level or tower material, compare related Columus models rather than increasing wattage alone.

6. Customization & OEM/ODM Options

· Tower height: 2.0 / 2.5 / 3.0 / 4.0 / 5.0 m project options; 3.0 m and 4.0 m are the most common family configurations.

· Envelope color, logo printing and project identification graphics, subject to material and print-process suitability.

· Input voltage, plug type, cable length, connector arrangement and generator interface for the target market.

· Light-source package: 3200 K / 4000 K / 5600 K planning options; other CCT by project; color rendering options follow the selected lamp/LED package.

· Protective transport packaging: reinforced export carton, plywood case or reusable flight case depending on project and shipping mode.

· Guy ropes, pegs, sandbags/ballast points, spare envelope, spare electrical parts and extension cables can be supplied as project accessories.

· Distributed LED geometry, sealed-air cell construction, outer diffusing envelope, low-noise thermal strategy and control protocol are custom-engineered.

Customization is subject to engineering review, component availability, certification scope and final quotation. Drawings, control architecture, logo artwork and special packing may require approval before production.

7. Product Size, Packing & Shipping
Non-working / collapsed product size	58 x 46 x 45 cm
Working size	Approx. 40 x 40 x selected tower height; reference 4 m working size approx. 40 x 40 x 400 cm
Reference export packing size	68 x 56 x 56 cm
Reference net weight	41-47 kg
Reference packed weight	55-63 kg
Standard protective packing	Protective internal foam/wrapping plus reinforced export packing. Professional orders may use plywood or reusable flight case.
Optional split packing	Large ballast/driver or high-power light head may be packed as a separate electrical case to improve handling and protect components.

Packing dimensions and weight are logistics planning references only. Final packing size, number of packages, net/gross weight and case type must be reconfirmed before shipment because tower height, ballast/driver, lamp head, cable length, battery option and accessories can change the final package.

Shipping Options

· Air freight for samples, urgent project deliveries or small quantities.

· Sea freight by LCL or FCL for project quantities and cost-sensitive international delivery.

· Road / rail freight where destination and trade route allow.

· Door-to-door logistics can be arranged subject to destination, Incoterm, consignee information and local import conditions.

· Express courier is generally reserved for spare parts, lamps, drivers, controls and small accessories rather than complete large light-tower cases.

8. Commercial Reference
Production lead time	Typically 20-35 working days after final technical approval; complex custom engineering or first-article work may require a project-specific schedule.
Warranty	Reference commercial standard: 12 months from shipment against manufacturing defects. Final quotation / sales contract governs.
Warranty exclusions	Consumable lamps, normal wear, batteries unless separately stated, physical damage, improper power supply, operation outside approved environmental limits, unauthorized modification and misuse.
After-sales support	Remote technical support, troubleshooting guidance and replacement parts subject to confirmed order configuration and diagnostic evidence.
Spare parts	Lamps, ballast/driver, envelope, blower, cables/connectors, controls and selected mechanical parts can be quoted according to model.
Order confirmation	Final model code, voltage/frequency, tower height, light source, ballast/driver, control, CCT/CRI, cable/plug, branding, packing and destination must be confirmed before production.
9. Inquiry / RFQ Checklist

· Application and work-site description

· Required illuminated area and target lux level

· Preferred tower height or site height limitation

· Input voltage/frequency and available power source

· Need for battery / AC-DC operation and target runtime, if applicable

· CCT, CRI and flicker/camera requirements

· Control requirement: on/off, step dimming, continuous dimming, remote, DMX or APP

· Wind/weather environment and anchoring conditions

· Quantity, destination country/port, preferred transport mode and packing expectation

· Logo / branding artwork and required accessories

10. FAQ

Which tower height should I choose?

The family supports 2.0-5.0 m project heights. For LED800AP, the normal recommendation is 3.0-4.0 m. Final height should be selected from required lux, coverage, wind exposure and transport limits.

How large an area can it illuminate?

The planning reference is up to about 10,500 m² at the very low 1-lux boundary and about 2,100 m² at 10 lux. A more practical 10-20 lux working-zone planning range is about 1,050-2,100 m². Higher task-light levels reduce the effective area substantially.

Can it run from batteries?

Not as the standard recommendation. AC mains or generator power is normally preferred at this power level.

Is the light flicker-free?

Professional low-flicker driver is recommended; camera/high-speed requirement must be stated at enquiry stage

Can CCT and CRI be customized?

3200 K / 4000 K / 5600 K planning options; other CCT by project. Ra >=90 preferred planning basis for premium AP projects; higher color-quality packages by project Final availability depends on the selected lamp/LED package.

Is it waterproof and wind resistant?

The system is designed for outdoor temporary use, but the exact IP declaration and permitted wind speed must be confirmed for the approved electrical package, tower height, base and guy-line/anchoring method. Do not treat a legacy value as universal across all 2026 models.

Can our logo be printed on the tower?

Yes. Logo, project identity and selected graphics can be applied to compatible envelope materials. Artwork and print area are confirmed before production.

What are the warranty and lead time?

Reference warranty is 12 months against manufacturing defects from shipment, subject to final quotation/sales contract and exclusions for consumables, lamps, batteries and misuse. Typically 20-35 working days after final technical approval; complex custom engineering or first-article work may require a project-specific schedule.

11. Related Models

LED400AP.

Use related models to compare source technology, restart behavior, control capability and cost positioning before choosing a higher wattage.

Continue Exploring Products Adjacent products across the Products product family

Columus Columus LED400AP 400W Low-Noise LED Inflatable Light Tower

Columus 没有了！

Project Inquiry · Technical & Commercial

Send Your Custom Product Requirement

Tell us the product family, intended application, size, quantity, operating conditions and delivery target. Your inquiry email will automatically include the page you are viewing so our team can understand the exact product, technology or reference that led to your request.

Product family or model of interest
Required size, quantity and customization
Application, installation and operating environment
Project country, operating conditions and delivery target

Inquiry context Current page details will be attached automatically.